PTFE Conveyor Belts

Single PLY Conveyor Belts

Our single ply conveyor belt are made of ptfe glass or ptfe aramid. We supply different fabrics with the variety of weaving patterns and structures on the surface. Please call us for your specific demand, and we could recommend a belt which is exactly for
INQUIRY

Single PLY Conveyor Belt


Our single ply conveyor belt are made of ptfe glass or ptfe aramid. We supply different fabrics with the variety of weaving patterns and structures on the surface. Please call us for your specific demand, and we could recommend a belt which is exactly for your needs. Currently our max width can be up to 3000mm.

We supply different joints for our customers, and the main styles of joints are as below,


 Overlap Belt Joint: Overlap joints are a simple and easy joint to use where having an even surface is not critical. This is the most popular seam because it is strong   inexpensive  and easiest to produce. The disadvantage of the overlap seam is that it is not very smooth and in some applications the seam may mark the material being   fused. In addition,  because the overlap seam is more than double the thickness of the rest of the belt it is slightly stiffer and suffers from early flex fatigue and very   often breaks.-




 Scarfed Belt Joint: A scarf joint is similar the overlap but offer a smooth transition for the product to run offering no lip for products to catch on.This is the smoothest,   strongest, most flexible seam available today. It resembles a 30 mm overlap seam but is much smoother and more flexible. There is no almost double thickness, as the   mating surfaces are carefully ground to a taper and securely welded.




 Angled Belt Joint: This seam is cut at a slight angle helping the belt to roll easily over the fusing machine rollers, reducing flex fatigue. The angle of the overlap can be   varied, so that the splice does not run over the conveyor pulleys in one line. 45° and 70° are popular.
 








 
TOP